195.22 (beta) Release highlights
* Enhanced the VDPAU blit-based presentation queue to provide values of "first_presentation_time" that have less jitter.
* Add support for R16F and RG32F GLXFBConfigs when using GeForce 8 series and higher GPUs.
* Added support for NVIDIA 3D Vision Stereo on Linux with Quadro GPUs. See the "Stereo" X configuration documentation in the README for details.
* Added support for A2BGR10 32-bit GLX visuals on 30-bit X screens. These allow some level of window transparency when using 30-bit visuals with GLX and Composite, but they may cause problems with older X servers and/or applications. ARGB GLX visuals can be disabled by adding:
Option "AddARGBGLXVisuals" "False"
to the X configuration file.
* Fixed a problem that caused DisplayPort devices to behave incorrectly when DPMS power saving mode was triggered.
* Updated VDPAU to improve thread concurrency. See the README for details.
* Altered NVIDIA X driver behavior in the case that no display devices are connected to the GPU. Previously, in this case, the NVIDIA X driver would pretend a CRT was connected to the GPU. Now, the NVIDIA X driver will not automatically pretend that any CRTs are connected. If the X driver does not detect any connected display devices, the X server will fail to start.
To restore the old behavior, use the ConnectedMonitor X configuration option; e.g.,
Option "ConnectedMonitor" "CRT"
Alternatively, if display is not desired, Quadro and Tesla GPU users can enable "NoScanout" mode, which bypasses any mode timing validation or use of display devices; this is configured with:
Option "UseDisplayDevice" "none"
* Disabled software cursors when the driver is operating in "no scanout" (UseDisplayDevice "none") mode. The software cursor image is not visible in remote desktop applications or screenshots anyway, so having software cursor enabled was unnecessary.
* Changed glXSwapBuffers() behavior for a pixmap such that it is now a no-op in the direct rendering case in order to match the indirect case and comply with the GLX spec. Previously, calling glXSwapBuffers() on pixmaps in the direct case would swap the pixmap's buffers if the pixmap was double buffered.
* Modified the installation location and names of internal VDPAU libraries to conform to conventions and Debian packaging guidelines. New versions of libvdpau expect this layout. Compatibility with old versions of libvdpau is maintained with symlinks.
* Fixed a bug that could cause errors in graphical applications run after a previous application using VDPAU and OpenGL. This behaviour was observed when running Gwenole Beauchesne's hwdecode-demos application.
* Modified vdpau.h to increment VDPAU_VERSION, to reflect the fact that new features have been added in the past. Also, add the new define VDPAU_INTERFACE_VERSION.
* Fixed a periodic temporary hang in the VDPAU blit-based presentation queue.
* Fixed a problem that caused resolution limitations or corruption on certain DisplayPort devices such as the Apple 24″ Cinema display or some DisplayPort to VGA adapters.
* Disabled the UseEvents option for GeForce 8 series and higher GPUs due to a problem that causes occasional short hangs. It will be re-enabled when that bug has been tracked down and fixed.
* VDPAU now allows multiple streams to be decoded at once, without the need to set any environment variables.
The 195.22 NVIDIA Accelerated Linux Graphics Driver Set for Linux/x86 is available for download via FTP.
The 195.22 NVIDIA Accelerated Linux Graphics Driver Set for Linux/x86_64 is available for download via FTP.
Please see the README (x86, x86_64) for more information about this release.
Please note: This NVIDIA Linux graphics driver release supports GeForce 6xxx and newer NVIDIA GPUs, GeForce4 and older GPUs are supported through the 96.43.xx and 71.86.xx NVIDIA legacy graphics drivers. GeForce FX GPUs are supported through the 173.14.xx NVIDIA legacy graphics drivers.
Note:- This is still in beta stage so it is not recommended to install on production systems
For Ubuntu Karmic Users
Use the following command to add PPA
sudo add-apt-repository ppa:nvidia-vdpau/ppa
First you need to edit /etc/apt/sources.list file
sudo gedit /etc/apt/sources.list
add one of the following lines
For Jaunty users
deb http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu jaunty main
deb-src http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu jaunty main
For Intrepid Users
deb http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu intrepid main
deb-src http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu intrepid main
For Hardy Users
deb http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu hardy main
deb-src http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu hardy main
Save and exit the file
Install GPG key using the following command
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys CEC06767
Update source list
sudo apt-get update
Install beta drivers
sudo apt-get install nvidia-glx-195 nvidia-195-modaliases
Incoming search terms:
- (gedit:12770): IBUS-WARNING **: The owner of /home/ssazon/ config/ibus/bus is not root!
- (gedit:21512): IBUS-WARNING **: The owner of /home/mzr/ config/ibus/bus is not root!
- (gedit:3636): IBUS-WARNING **: The owner of /home/ssazon/ config/ibus/bus is
- (gedit:3636): IBUS-WARNING **: The owner of /home/ssazon/ config/ibus/bus is not root!
- How to install Tesla K40c in Ubuntu
- IBUS-WARNING **: The owner of /home/csr/ config/ibus/bus is not root!
- Karmic jaunty hardy是什么
- Ubuntu how to install tesla K40c driver