How to install SiS 771/671 Mirage 3 Video Drivers in ubuntu 10.04 (Lucid)

Sponsored Link
This tutorial will explain How to install SiS 771/671 Mirage 3 Video Drivers in ubuntu 10.04
First you need to downlod the drivers from here .Once you downloaded you need to unzip them.

Open up a terminal and go to the path you've unzipped them in.(use the cd command to navigate to directory's) f.e; cd /home/user/Downloads

sudo cp sis671_drv.* /usr/lib/xorg/modules/drivers/

type in your password and press enter

then stop X server

We need to stop X or we won't be able to auto-generate a xorg.conf.new

sudo service gdm stop

you'll have to do next part blindly

Switch to tty1 by pressing Ctrl+Alt+f1

(f2 for tty2, f3 for tty3, etc.. (f7 should be X)

Even though you won't be able to read it (yet) you can login

type in your username and press enter

type in your password and press enter

Now you're logged in you want to become root; type;

sudo bash

type in your password

Now your root; type in

Xorg -configure

(this will create a xorg.conf.new in your home directory)

and start gdm again with

service gdm start

Once there; Open up a terminal again;

move the auto-generated xorg.conf.new to /etc/X11/xorg.conf

with

sudo mv xorg.conf.new /etc/X11/xorg.conf

and restart gdm by typing;

sudo service gdm restart

Fix the plymouth and the unreadable tty problem like this

Open up a terminal and type

sudo bash

enter your password

type;

echo blacklist vga16fb > /etc/modprobe.d/blacklist-vga16fb.conf

type;

update-initramfs -u

and reboot your system

reboot

Source from here

Sponsored Link

Incoming search terms:

Related posts

23 thoughts on “How to install SiS 771/671 Mirage 3 Video Drivers in ubuntu 10.04 (Lucid)

  1. If after doing this your screen resolution is a mess yet, then you should do this:

    ~# sudo gedit /etc/X11/xorg.conf

    And check in the device section if you have configured the correct driver:

    Device

    Driver “sis671″

    If you don’t, then change it. It’s a detail, just then it worked for me.

    [Reply]

  2. YOUR A LIFE SAVER!
    thank you so much – for a new ubuntu user this was a pain in the a*se. Thank you very much :D

    [Reply]

  3. hello, I have set my vga card “[SiS] 771/671 PCIE” but does not support 3D, any comments, to solve this problem?

    thanks.

    [Reply]

  4. @Johnny – Forget about 3D support on linux, for SiS graphics cards.
    SiS is very tied up with M$FT, in such a way, that they don’t release the source code, for their cards.
    The 2D support we have today, is in all parts, due to the developers community and, some SiS employees that now and then give some help.

    This was one of the main reasons, that i stopped buying anything with this chipset (graphics wise!).

    Cheers,

    Leo.

    [Reply]

  5. After I stop gdm, I just got flickering screen. Even after blindly input my password. What should I do?

    Please help.
    Thanks.

    [Reply]

  6. Excellent post! Worked first time.

    hika – the flickering screen is normal. Just make sure you follow the instructions carefully and you don’t have caps-lock on etc.

    Cheers!!!

    [Reply]

  7. I’ve followed the steps described in the article and the first comment, by Pablo Ignacio, however the machine boots to tty1. When I press Ctrl+Alt+F7 it’s stuck during boot at
    * Setting sensors limits

    What do I do?

    [Reply]

  8. It will work in other distribution that using similiar kernel and latest x-server.

    For the older kernel i will upload it later, i still got some problem with my connection here.

    [Reply]

  9. when i do the:
    service gdm restart
    after moving the xorg.conf.new to /etc/X11/xorg.conf

    i have a notification that UBUNTU IS RUNNING IN LOW-GRAPHICS MODE

    [Reply]

  10. Hi, great guide! My auto-generation of /etc/X11/xorg.conf wouldn’t work, so I had to create one from scratch. It should read:

    Section “Device”
    Identifier “Device0″
    Driver “sis671″
    EndSection

    Hope it helps someone…

    [Reply]

  11. Hello,

    I followed all your instructions, but when I arrived to the point:

    “and restart gdm by typing; sudo service gdm restart”

    my monitor becomes black and says something like “Frequencies not supported”

    Then I type: Crtl+Alt+F1 and I try to continue with the other instructions, but when I reboot my screen stays black with the message “Frequencies not supported”….

    I have re-installed Ubuntu 10:04 and followed the instructions with the same results

    I have a [SiS] 771/671 PCIE VGA card integrated in an Asus P5SD2-VM Motherboard.

    Any idea? Thanks

    [Reply]

Leave a comment

Your email address will not be published. Required fields are marked *