HUAWEI ETS-2288 CDMA BSNL WLL modem net configuration

July 21, 2010 · Networking · Email This Post

Share

If you're new here, you may want to subscribe to my RSS feed and if you have questions related to your ubuntu system post question to our forums. Thanks for visiting!

{lang: 'en-GB'}

Basically BSNL CDMA USB modems does not have any GUI software for connect to Internet, so we have to use command lines to configure the connection settings.

configuration :-

first download and install these 5 links below, one by one

• first
• second
• third
• fourth
• fifth

after installing the Debian files,

open application > accessories > terminal

and write this command and hit enter

>     sudo gedit /etc/wvdial.conf 

the gedit text pad will be open, in that pad write the blow lines and save that

[Dialer bsnl]
Modem = /dev/ttyUSB0
Baud = 230400
Phone = #777
Init1 = ATZ
Stupid Mode = 1
Dial Command = ATDT
Username =
Password =
PPPD Options = lock noauth refuse-eap refuse-chap refuse-mschap
nobsdcomp nodeflate

>(in user name and password write phone no, with code , erase starting zero in code.
that is, if no 0809988777 then write it as 809988777)

now the configuration is over

write this blow command in terminal to connect Internet.

sudo wvdial bsnl

after the writing command it shows IP and DNS addresses.

now its connected

importent:- dont quit terminal during net connection

press ctrl+c to disconnect….

Incoming search terms:

• how to active huawei ets 2288
• huawei net connect bsnl
• huawei ets2288
• bsnl wll huawei t1 ets2288 usb cdma modem driver xp
• huawei cdma confiugeration
• bsnl huawei net connect software
• how to connect bsnl cdma wll on ubuntu 12 04
• huawei ets cdma
• huawei ets 2288 ubuntu driver
• huawei ets configuration tools

Related posts

• Zik - Audio player based on gstreamer (2)
• Zero Install Injector - Install software easily and without root privileges (14)
• Zattoo - Watch Online TV for free (18)
• YouAmp - Yet another music player for Linux (9)
• ÜberStudent - Ubuntu version for Students and Researchers (16)
• YAPET - Yet Another Password Encryption Tool (1)
• YaCy - Peer to Peer free software search engine (3)

8 Comments to “HUAWEI ETS-2288 CDMA BSNL WLL modem net configuration”

1. raj says:

   November 2, 2010 at 9:05 am

   thank you !

   [Reply]
2. Heshantha says:

   January 11, 2011 at 7:09 pm

   Thanks Lot Pal ….
   I am Try hard for find this

   [Reply]
3. vishnu says:

   January 19, 2011 at 8:18 am

   Hi….. I am a beginer of ubuntu10.10. When i write the command “sudo gedit /etc/wvdial.conf” in terminal their is no gedit text pad will be open!!!. Plese help me…………….

   [Reply]
4. Shreyas says:

   February 5, 2011 at 3:06 pm

   Thanx a lot Friend……..

   [Reply]
5. Tommy says:

   February 26, 2011 at 1:34 am

   not ok.

   sudo wvdial bsnl gave me errors!!

   [Reply]
6. Arun says:

   July 21, 2011 at 12:29 pm

   The modem is not being recognized at /dev/ttyUSB0 getting this error while i execute Wvdial bsnl

   [Reply]
7. Anandhakrishnan says:

   December 8, 2011 at 10:52 am

   the links that you provided for debian packages are not working please give the updated links for them

   [Reply]
8. Anandhakrishnan says:

   December 8, 2011 at 10:57 am

   also it give the errors like this

   sudo wvdial bsnl
   --> WvDial: Internet dialer version 1.60
   --> Cannot open /dev/ttyUSB0: No such file or directory
   --> Cannot open /dev/ttyUSB0: No such file or directory
   --> Cannot open /dev/ttyUSB0: No such file or directory

   [Reply]